You can access Cisco ASA appliance using Command Line Interface (CLI) using either Telnet or SSH and for web-based graphical management using HTTPS (ASDM) management. Telnet uses TCP port 23 and is not secure. Secure Shell (SSH) on the other hand uses port 22 and is secure. SSH uses public key cryptography to authenticate remote user. You can configure SSH access in Cisco ASA device using the steps shown here.
Hide my ip 6 licence key generator. How I create RSA key and enable SSH access in Cisco VG202, in a Cisco router I use the next commands(but in a VG not exists): conf t crypto key generate rsa modulus 1024 ip domain-name domain-name ip ssh version 2 ip ssh time-out 120 ip ssh.
Step 1: Configure Enable password. (Optional)
Step 2: Create a username with password.
Step 3: Configure this local username to authenticate with SSH.
Step 4: Create RSA key pair.
Step 5: Now specify only particular hosts or network to connect to the device using SSH.
You can now access the device using SSH from 192.168.1.0 and 172.16.1.0 network.
In this way you can configure remote SSH access in Cisco ASA appliance.
Q: I have a Cisco switch in my network, which I can access by hooking up a console cable directly to the device. I like to access the switch remotely using SSH. How can I enable ssh on my Cisco 3750 Catalyst Switch?
A: By default, when you configure a Cisco device, you have to use the console cable and connect directly to the system to access it. Follow the steps mentioned below, which will enable SSH access to your Cisco devices. Once you enable SSH, you can access it remotely using PuTTY or any other SSH client.
First, make sure you have performed basic network configurations on your switch. For example, assign default gateway, assign management ip-address, etc. If this is already done, skip to the next step.
In the following example, the management ip address is set as 192.168.101.2 in the 101 VLAN. The default gateway points to the firewall, which is 192.168.101.1
Next, make sure the switch has a hostname and domain-name set properly.
The switch or router should have RSA keys that it will use during the SSH process. So, generate these using crypto command as shown below.
Also, if you are running on an older Cisco IOS image, it is highly recommended that you upgrade to latest Cisco IOS.
Setup the following line vty configuration parameters, where input transport is set to SSH. Google chrome site settings key generation download. Set the login to local, and password to 7.
If you have not set the console line yet, set it to the following values.
If you don’t have an username created already, do it as shown below.
Note: If you don’t have the enable password setup properly, do it now.
Make sure the password-encryption service is turned-on, which will encrypt the password, and when you do “sh run”, you’ll seee only the encrypted password and not clear-text password.
From the switch, if you do ‘sh ip ssh’, it will confirm that the SSH is enabled on this cisco device.
After the above configurations, login from a remote machine to verify that you can ssh to this cisco switch.
In this example, 192.168.101.2 is the management ip-address of the switch.
Next post: How to Backup Oracle Database using RMAN (with Examples)
Previous post: How to Use C++ Single and Multiple Inheritance with an Example